BERGO ROYAL
Draining polypropylene tiles
Bergo Royal (Sweden) polypropylene tiles, 30×30 cm and 13 mm thick, are easy and quick to lay to adapt to changing environments.
They are suitable both indoors and outdoors because polypropylene is a material resistant to sunlight but also to weathering (heat, cold, rain).
Its color range is composed of low intensity colors such as white, gray and sand, or more vibrant colors such as light blue, green or yellow. Its perforations allow water to drain and prevent the formation of puddles, as well as a quick drying of the soil.
Non-slip, they are pleasant to walk on barefoot and require little maintenance. Being durable, the Bergo Royal tile guarantees a very long life cycle and can be recycled at the end of it. The installation is made floating, the floor can be disassembled and reused elsewhere.
It is not a cushioning floor for areas with high slides, in this case, we recommend Supragom rubber tiles.
Recommended soil for
School and kindergarten playgrounds, play areas (not a cushioning floor for areas with high slides), pool surrounds.
Why choose Bergo Royal
01. Quick and easy assembly system.
02. Suitable for outdoor use in extreme conditions.
03. Anti-slip and draining to avoid puddles.
04. Detachable.
05. Wide range of colors.
| Range | Dimension | Thickness | References |
|---|---|---|---|
| Bergo Royal | 30×30 cm | 13 mm | 12 |
-
- Stone Gray
-
- White
-
- Green
-
- Black
-
- Dark gray
-
- Sand
-
- Yellow
-
- Silver
-
- Light gray
-
- Purple
-
- Red
-
- Royal blue
BERGO ROYAL TILE INSTALLATION
The installation of Bergo Royal tiles is simple and fast thanks to its “clip” system. A rubber hammer is all that is needed (photo 1).
Disassembly can also be done easily using special tools (photos 2 and 3).
Bergo Royal tiles have perimeter access ramps and expansion joints placed every 3 to 4 meters to absorb expansion and contraction movements due to strong temperature changes (photo 4).
It is important that the floor remains floating except in places with a steep slope to one side (in this case the center of the track could be fixed).
It is necessary to leave expansion joints of 2-3cm in the perimeter and in the possible obstacles. The tiles are cut with a jigsaw or circular saw.
The maintenance required for Bergo Royal tiles is minimal.
