ENERGY CF
Rubber sports tiles
Energy CF is a sports rubber tile specially designed for areas that require greater cushioning, such as weight rooms, weight training or crossfit. Its density and high impact resistance are due to the fact that it is manufactured with a large amount of raw material and a greater pressing. It is a safe floor against bouncing of heavy objects such as discs or weights.
Energy CF tiles have good acoustic properties and their innovative smooth surface is long lasting and requires minimal maintenance.
It is a slip-resistant floor that can be installed both indoors and outdoors, since the binder used is prepared for this purpose (see conditions for outdoor installation).
Manufactured in 100x100cm, six thicknesses (10/15/20/25/30/40mm) and various colors: black, terracotta, green, yellow ochre, blue, lead gray and black with colored speckles.
If you are looking for a rubber flooring in rolls or puzzle tiles, we have a range of rubber flooring in rolls or puzzle tiles. Energy.
Recommended soil for
Gyms, weight rooms, crossfit rooms. Indoors and outdoors (outdoors, a coarser grain is used and it is essential to have a perfect water evacuation system that avoids the formation of puddles).
Why choose Energy CF
01. Tiles cushion the falls of the weights.
02. Tiles with acoustic absorption.
03. High resistance rubber tiles for gymnasiums.
04. Removable floor.
05. Tiles with great tread comfort.
06. Safe and non-slip tiles.
| Range | Dimension | Thickness | References |
|---|---|---|---|
| Energy CF10 | 100x100cm | 10mm | 7 |
| Energy CF15 | 100x100cm | 15mm | 7 |
| Energy CF20 | 100x100cm | 20mm | 7 |
| Energy CF25 | 100x100cm | 25mm | 7 |
| Energy CF30 | 100x100cm | 30mm | 7 |
| Energy CF40 | 100x100cm | 40mm | 7 |
-
- Black
-
- Red
-
- Blue
-
- Ochre yellow
-
- Green
-
- Gray
-
- Motitas
-
- Surface of the Energy CF 10
-
- Ochre yellow
-
- Blue
-
- Black
-
- Motitas
-
- Gray
-
- Green
-
- Red
-
- Energy CF 15 surface
-
- Mottled
-
- Red
-
- Green
-
- Ochre yellow
-
- Gray
-
- Blue
-
- Black
-
- Surface area of CF 20
-
- Ochre yellow
-
- Black
-
- Blue
-
- Green
-
- With speckles
-
- Red
-
- Gray
-
- Energy CF 25 surface
-
- With speckles
-
- Gray
-
- Black
-
- Green
-
- Red
-
- Ochre yellow
-
- Blue
-
- Energy CF 30 surface
-
- Black
-
- Red
-
- Gray
-
- Green
-
- Surface of the Energy CF 40
-
- Blue
-
- Ochre yellow
-
- Energy CF 40 solid tile
-
- With speckles
INSTALLATION AND MAINTENANCE ENERGY CF
The tiles can be installed with a continuous joint or with a changed joint on a flat, firm, clean and dry surface (concrete, ceramics). The rubber tiles have a tolerance and can present small differences of a few millimeters between their sides that are compensated by tightening them. They can be fixed to the floor or the tiles can be glued together at the joints. Outdoors, the water must be able to be evacuated by slope and drainage to avoid the formation of puddles that could damage the base of the tile. The surface will be different (coarser grain to allow better drainage).
Daily cleaning should be done with a powerful vacuum cleaner to remove dust and dirt. This can be followed by scrubbing with a neutral pH detergent diluted in water (50:1), with a damp mop; never throw water directly on the floor. For optimal cleaning, it is advisable to go over the area with a damp mop and clean, clear water without soap.
