BERGO UNIQUE
Plastic tiles for outdoor and wet areas
The Bergo Unique range of polypropylene tiles offers a special touch to make a difference and create a modern and unique environment. Of 38x38cm and 10mm thick, its placement is very simple (clip system). The perforations of the Bergo Unique plastic tile allow water drainage and quick drying of the surface, being an interesting solution in areas where puddles are formed.
Elegant in design, they are also very resistant tiles, providing hygiene, comfort and safety (class 2 according to EN 41901).
They can be installed both indoors and outdoors and are supplied with a system of ramps and perimeter angles. Bergo Unique tiles are floating and can be disassembled and moved to another location.
Similar tiles: Bergo XL, Supratrax Zen.
Recommended soil for
Terraces, patios, changing rooms, private pool surrounds, basements, balconies.
Why choose Bergo Unique
01. Draining floor with fast drying.
02. Hygienic floor.
03. Outdoor flooring resistant to weathering and sunlight.
04. Easy to install floor.
05. Non-slip floor, Class 2 in wet conditions.
| Range | Dimension | Thickness | References |
|---|---|---|---|
| Bergo Unique | 38×38 cm | 10mm |
-
- Terracotta TC
-
- Stone gray SG
-
- Steel Blue SB
-
- Arena SA
-
- Dark Gray GG
1. Start in a corner: see picture. Remember to always turn the protruding rings in the same direction (forward).
2. Fasten the tiles with the connection plugs on the protruding rings and fit them with dry blows of a rubber mallet.
3. Completed.
REMEMBER: before installing the floor Allow the tiles to stand for a few hours in the room where the floor is to be installed, so that they are at the same temperature. To make sure it works well, always install a Bergo floor on a clean, hard and even surface. Allow some distance from walls, thresholds, etc. if the floor is likely to be exposed to varying temperatures.
DOWNLOADS
